![]() ![]() If the 802.11n or 802.11ac AEBS or TC is connected directly to the broadband Internet modem or combination modem/router or gateway device, verify that the device is in bridge mode, i.e., if the device provides NAT & DHCP services, disable them.iOS/iPadOS: Access will require a third-party app, like FileBrowser.The user name can be anything you like the password should be the disk password for your base station. You should be prompted for your user name and password.Enter the DynDNS-provided Domain Name of the base station, followed by a colon and the Public port number that you chose from the setup steps above.From the Finder > Go > Connect to Server.Select the base station > Edit> Disks tab > Check both " Enable file sharing" & " Share disks over WAN" options are enabled.Select the base station > Edit > Internet tab > Internet Options. ![]() One DDNS-provider is DynDNS and will be assumed for the following steps. Acquire a DDNS account and dynamic global host name.Regardless of the provider, the setup instructions should be the same. Another option would be to use a different DDNS service provider, like Dynu. ![]() If you use DynDNS, you still will have two choices: 1) Use a DynDNS client on a computer running on your local network to provide the updates, or 2) Replace the AirPort base station with another manufacturer's product that has native DDNS support. NOTE: The DDNS-provider DynDNS, used in the setup example below, no longer supports AirPort base stations running firmware 7.6.1+ or AirPort Utility 6.1+. Using Finder, verify that you can access the AirPort Disk from the local network. The methods presented are not necessarily in any particular order. There are at least three potential methods to access a shared AirPort Disk over the Internet from a remote Mac or iOS/iPadOS device. I am wondering if i need to actually set up the machine before i evaluate what color the LED is or whether it is flashing.NOTE: For the purpose of clarification, an AirPort Disk can either be an internal HDD in a Time Capsule (TC) or an external SSD/HDD attached to the USB port of either a TC or an AirPort Extreme base station (AEBS). ![]() I am thinking to simply remove my TIME CAPSULE from everything so the data cannot get corrupted and so i can SET UP this device but i am not sure if i am simply wasting my time.ĭoes that question make sense? or was it answered earlier and i missed it? I am under the impression i need to do a FULL SETUP before i get the green light and that i won't get a green light until i set it up on the network. So i have not gone through the full setup. In the first image i posted you can see the prompt where it says it is will REPLACE my time machine and the "base station" (associated with my TIME CAPSULE BACKUP) "will be reset to default settings". i don't want to do something dumb with my data so i am trying to ask questions first. i had to STOP setup because it is giving me a prompt that is confusing to me with respect to my TIME CAPSULE backup. What i am trying to ask is that i have NOT gone through a setup for the device. anyway, i understand that the solid amber (in this case it is now blinking amber) is not working. for some reason i only see it in my email but not on the forum. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |